We work out of 50166 Cherry Hill Rd in Canton, and most of our calls come from inside a tight radius of that shop. Plymouth is 4 miles out, Wayne is 5, Garden City and Belleville are both around 7, and Inkster and Romulus sit at 8. We also run jobs up to Northville (9 miles), Dearborn Heights (10), and Taylor (12), and we'll go as far as Wixom, Melvindale, Walled Lake, and the string of Downriver towns - Southgate, Lincoln Park, Wyandotte, Riverview, Woodhaven, Ecorse, River Rouge - that sit 16 to 18 miles from the shop. Saline, Bingham Farms, Lathrup Village, and Oak Park are on the far edge of what we'll drive for, at 17 to 19 miles. If you're not sure whether your address falls inside that range, call and ask before you book - it takes thirty seconds and saves everyone a wasted trip.
Canton itself is the bulk of our work, and the housing here shapes what we see on a truck. A lot of the stock in this part of the county went up between 1944 and 1991, with the median build year sitting around 1963, so a good share of the doors and openers we're pulling apart are original or close to it.
We fix and replace residential garage doors, springs, openers, tracks, cables, and rollers. We don't do commercial overhead doors, gate systems, or fencing, and we don't do general handyman work just because a door happens to be in the garage. If a job needs a structural rebuild of the opening itself - header, jamb, framing - that's outside what we handle, and we'll tell you so up front rather than take the call and figure it out on site.
Winters here fall in the severe cold band, and that matters for one honest limitation: if a spring or cable failed because of age and cold-weather brittleness rather than a bad install, replacement is usually the better call than a patch repair, and we'll say that even when a patch would be the easier sale. We also don't stock every part for every door on the first visit - some openers and older torsion setups from the 1960s and '70s stock across this area need a part ordered in, and we'd rather tell you that on the phone than have you wait at home for a truck that can't finish the job that day.
Call 1-734-488-7349. Tell whoever answers what the door is doing - won't open, won't close, off the track, spring snapped, opener dead - and where you're located relative to Canton. If you're inside the coverage area above, we'll get a window scheduled, usually within the same span of days depending on what part's needed and whether it's a stock item.
On site, the tech looks at the actual failure before quoting anything - springs, cables, rollers, and openers all fail differently, and a five-minute look tells us more than a phone description ever will. You'll get a price before any work starts, not after. If the fix turns out to be more than the door is worth - which happens more often on the older stock built before the 1990s - we'll say so instead of running up a bill on a door that should be replaced. You can also start at our home page for a quick overview before you call.
Yes. Plymouth is about 4 miles from our shop and Wayne is about 5, both well inside the area we run trucks to daily. Call 1-734-488-7349 and we'll get you on the schedule.
Call first. Our coverage runs from Canton out to towns roughly 4 to 19 miles away, including Wixom, Saline, and the Downriver communities. If your address falls outside that range, we'll tell you honestly rather than book a trip we can't make.
A lot of the housing in this area dates to the 1960s and '70s, and doors and openers from that era often fail in ways where a patch won't hold long, especially after a severe cold winter. If replacement is the more honest answer, we'll say so before we start any work.
Find Us
50166 Cherry Hill Rd, Canton, MI, 48187
Call now or request a free quote - same-day service on most repairs, upfront written pricing.
